PURE-SOUNDING 10-IN / 4-OUT AUDIO INTERFACE FOR THE RECORDING ARTIST
Whether recording vocals and instruments or composing in the box, Clarett+ 2Pre is the pure-sounding, bus-powered* USB-C interface for PC and Mac to take with you on your creative journey.
CLARETT⁺ MIC PREAMPS
Two Clarett+ mic preamps — featuring All-analogue Air with impedance switching and relay control — capture superbly clear recordings with high headroom, low distortion and ultra-low noise. Two JFET instrument inputs let you plug straight in and preserve the natural tone of your guitar, just like plugging into an amplifier.
INDEPENDENT A-D AND D-A CONVERTERS
Independent A-D and D-A converters bring you closer than ever to your music and let you hear the truth, whether you’re in the studio or on the road. Greatly improved D-A dynamic range enables you to hear every detail and have greater control over your mix. Lower A-D converter distortion lets you capture signals with more clarity, for greater transparency and sonic accuracy.
ANYTHING, ANYWHERE
Big recording session? Use ADAT to add 8 mic pres with Clarett+ OctoPre for a 10-input tracking environment. Keeping it simple? 15W USB bus-power Clarett 2Pre; hook up your mics or guitar and go.
HITMAKER EXPANSION
Create studio quality vocals, powerful guitars, luscious keys and huge drums, then mix and master with iconic Focusrite studio hardware – all in the box. Every new Scarlett 3rd Gen, Clarett and Red interface comes with an unbeatable range of tried-and-tested studio tools from some of the biggest names in the business.
Hitmaker Expansion – available with every Scarlett 3rd Gen, Clarett+, Clarett USB and Red interface purchased and registered on or after October 1st 2021 – is built to get you creating records immediately. These are all the plug-ins you need to write, produce, mix and master your music in studio quality.
Hitmaker Expansion features exclusive content from legendary Auto-Tune® creators Antares®, along with Brainworx®, Softube®, XLN Audio®, Relab and more.
EMULATE ICONIC FOCUSRITE HARDWARE
Get the full Focusrite sound with three classic processors from Focusrite’s 40 year legacy of precision studio sound.
Brainworx bx_console Focusrite SC is an authentic emulation of the classic ISA 110 module found in Focusrite Studio Console. ISA 110 was created when Sir George Martin asked Rupert Neve for custom modules for AIR Montserrat studios.
The Red 2 & Red 3 Plug-in Suite accurately models Focusrite’s classic Red range equaliser and compressor hardware. Coveted by producers and engineers for their exceptional clarity and versatility, the original Red 2 and Red 3 remain prized fixtures in professional recording studios the world over. Now, you can use these revered pieces, easily and flexibly, in your own mixes.
Focusrite Clarett+ 2Pre USB Audio Interface Features:
TWO PROFESSIONAL QUALITY CLARETT⁺ PREAMPS
Capture clear and powerful recordings with preamps that bring masses of headroom, low distortion and ultra-low noise.
POWERFUL AND TRANSPARENT HEADPHONE OUTPUT
Create your best mixes and recordings, and inspire amazing performances with an improved headphone output that provides a flat frequency response at all output levels with any type of headphones.
USB-C BUS POWERED
USB-C connection provides bus power. 15W USB-C port required.
*15W USB-C capabilities required for bus-powered operation. Find out if you have a 15W USB-C port.
MAKE VOCALS SHINE WITH ALL-ANALOGUE AIR
Premium, relay-controlled analogue circuitry on every preamp emulates the classic Focusrite ISA 110 by switching the impedance to 2.2kΩ and adding two cumulative high shelves, totalling a 4dB boost in the high frequencies.
JFET INSTRUMENT INPUTS
Dedicated, ultra-high-impedance JFET instrument inputs, with extremely wide audio bandwidth, mimic guitar amp inputs to preserve the natural tone of guitars and capture their true character.
FOCUSRITE PLUG-IN COLLECTIVE
Register to receive regular discounts and exclusive versions of the most innovative software titles.
NEW AND IMPROVED A-D AND D-A CONVERTERS
Capture more accurate recordings wherever you are, with extremely high-performance, independent A-D and D-A converters that deliver extremely low noise, low distortion and high dynamic range.
ADAT OPTICAL INPUT
Expand Clarett+ 2Pre to make the most of ADAT-compatible outboard equipment such as Clarett+ OctoPre, with eight channels of digital expandability: perfect for every stage of your creative journey.
FOCUSRITE CONTROL
Easy-to-use and feature-packed software for PC, Mac and iOS devices gives you complete control over all aspects of Clarett+.
Focusrite Clarett+ 2Pre USB Audio Interface SPECIFICATIONS IN DETAIL
MIC INPUTS
Frequency Response 20-20kHz: ± < 0.03dB
Frequency Response 20-35kHz: ± < 0.15dB
Dynamic Range (min gain): 118dB
THD+N (-1dBFS, +20dB gain): -110dB
Noise EIN: -129dBu
Max input level: 18dBu
Gain range: +57dB3
LINE & MONITOR OUTPUTS
Frequency Response 20-20kHz: ± < 0.02dB
Frequency Response 20-35kHz: ± < 0.02dB
Dynamic Range: 124dB
Max Output level: 18dBu
THD+N: -106dB
LINE INPUTS (VARIABLE)
Frequency Response 20-20kHz: ± < 0.05dB
Frequency Response 20-35kHz: ± < 0.15dB
Dynamic Range (min gain): 118dB
THD+N (-1dBFS, min gain): -100dB
Max input level: 26dBu
Gain range: +57dB
INSTRUMENT INPUTS
Frequency Response 20-20kHz: ± < 0.04dB
Frequency Response 20-35kHz: ± < 0.15dB
Dynamic Range: 116dB
THD+N (-1dBFS, min gain): -96.5dB
Max input level: 15dBu
Gain range: +57dB
HEADPHONE OUTPUTS
Frequency Response 20-20kHz: <0.06dB
Frequency Response 20-35kHz: <0.07dB
Dynamic Range: 118dB
THD+N: -104dB
Max Output level: 16dBu