The Twin6 Be is the best seller of the Focal Professional range and the most versatile work tool of the SM6 line. It represents the only necessary solution for recording, mixing and mastering. The image precision, treble definition as well as midrange neutrality are at the heart of its reputation. The excellent articulation of the bass and midbass registers, even at very high sound levels, makes it an unavoidable reference for engineers who require absolute transparency. Furthermore, the design of the Twin6 Be permits a high SPL while at the same time offering a stable tonal balance. One of the two 6.5" woofers works in large band (midrange – bass) whereas the other reproduces from 40 to 150Hz. This creates a bass that preserves all the signal dynamics, without any masking effect in the midrange, thereby keeping all its neutrality and transparency. Additional control of the bass register is accomplished by fine-tuning on the control plate on the back of the Twin6 Be in order to obtain a perfect mirror configuration with its mate. The Twin6 Be can be installed vertically or horizontally to respond to the space requirements of each studio. FutureMusic: Platinum Award
Focal Twin6 Be 6.5" Active 3-way Studio Monitor at a Glance:
- Focal's best-seller is all about precision, definition, and accuracy
- Hear the advantages of Focal's Beryllium inverted-dome tweeter
- "W" composite sandwich cone helps to optimize the frequency response curve
Focal's best-seller is all about precision, definition, and accuracy
It's no secret, the Focal Twin6 Be 3-way nearfield monitors have been sweeping studios all across Europe and the States. Why? They're extraordinarily transparent — and they're Focal's most versatile work tool. Thanks to the Twin6 Be's image precision, treble definition, and midrange neutrality — all of which are at the heart of the Twin 6 Be's reputation — you'll have all the studio monitor you need for recording, mixing, and mastering.
Hear the advantages of Focal's Beryllium inverted-dome tweeter
A Focal hallmark is the inverted-dome tweeter — and it's a big part of the magic behind the Twin6 Be's amazing performance. The particular advantage of the inverted dome is that it optimizes the mechanical coupling between the voice coil and the dome. As the voice coil is fixed at mid-height on the dome, it can uniformly move the Twin6 Be's entire cone surface. This design inherently offers high efficiency, precision, and energy, all resulting in an extremely precise soundstage. Add to that the use of Beryllium for the Twin6 Be's dome — a material noted for its incredible rigidity — and you've got a speaker that can near-linearly span from 40Hz all the way up to 40kHz, above the range of human hearing.
"W" composite sandwich cone helps to optimize the frequency response curve
The Twin6 Be takes advantage of Focal's "W" composite sandwich cone. The unique characteristics of the cone permits optimization of the frequency response curve, thanks to the total control of three key parameters: lightness, rigidity, and damping. The sound is amazingly transparent, has an excellent phase response, and has an extremely low distortion rate.
Focal Twin6 Be 6.5" Active 3-way Studio Monitor Features:
- Focal's best-selling studio reference monitor
- Hallmark-Focal inverted-dome tweeter, for high efficiency, precision, and energy
- Employs a rigid Beryllium tweeter, for Focal's best-in-range tweeter performance
- "W" composite sandwich cone permits optimization of the frequency response curve
Focal Twin6 Be 6.5" Active 3-way Studio Monitor Specifications:
- Frequency response: 40Hz-40kHz
- Maximum SPL: 115dB SPL (peak @ 1m)
- Input Type/Impedance: symmetrical/10 kOhms
- Input Connector: XLR
- Sensitivity: Adjustable, +4dBu or -10dBV
- Bass/mid-range: 2x150W rms, BASH technology
- Treble: 100W rms, AB class
- Electric supply: 230V (2A fuse), 115V (4A fuse), Removable IEC supply wire
- Input-sensitivity selector
- Mid-range speaker selector (right/left)
- Adjustable tweeter and woofer levels by potentiometer
- Power on/off
- Voltage selector
- Power on LED
- Woofer: 2x6W4370B Focal "W" composite sandwich cone 6-1/2" (16.5cm) speaker
- Tweeter: TB871, Focal inverted dome tweeter in Beryllium
- Transducer shielding: Integral through cancellation magnets or by magnet design
- Box: 7-1/2" (19mm) MDF panels
- Finish: Dark red natural veneering side panels, black body
- Dimensions (HxWxD): 9-13/16 x 19-11/16 x 13-3/8 " (250x500x340mm)
- Weight: 30.8lb (14kg)
Focal's best-selling reference monitor, the 3-way Twin6 Be, is all about a linear response and a precision image!
| Specification |
Detail |
| Powered |
Yes |
| Power Configuration |
Tri-amped |
| LF Driver Size |
6.5" (Sub), 6.5" (Mid) |
| LF Driver Type |
Cone |
| LF Driver Material |
Composite Sandwich |
| HF Driver Size |
1" |
| HF Driver Type |
Inverted Dome |
| HF Driver Material |
Pure Beryllium |
| LF Driver Power Amp |
150W (Sub), 150W (Mid) |
| HF Driver Power Amp |
100W |
| Frequency Range |
40Hz-40kHz |
| Maximum Peak SPL |
115dB SPL (peak @ 1m) |
| Enclosure Type |
Sealed |
| Input Types |
1 x XLR |
| Output Types |
No Outputs |
| Height |
9.81" |
| Width |
19.69" |
| Depth |
13.38" |
| Weight |
30.8 lbs. |
| Manufacturer Part Number |
#FOPRO-TWIN6BE |
|
Products 
Audio & Midi Interfaces 86 
Drum and Pads 7 
Headphones 22 
Keyboards and Synths 13 
Microphones 109 
USB MIDI Keyboards - Controllers 27 
Mixers and Recorders 21 
Processors and Amplifiers 33 
Software 3 
Studio Monitors 46 
Accessories 
Cables and Connectors 33 
Filters and Screens 7 -70x43.jpg)
Pedals 3 
Power Conditioner 1 
Stands, Mounts and Boompoles 26 
Brands 
Contact US 
FireWire Audio Interfaces 4 
ThunderBolt Audio Interfaces 6 
USB Audio Interfaces 79 
Condenser Microphones 42 
DSRL & Smart Phones Microphones 20 
Dynamic Microphones 24 
USB Microphones 17 
25 Keys Controller 7 
37 Keys Controller 3 
49 Keys Controller 6 
61 Keys Controller 5 
88 Keys Controller 2 
Headphone Amplifier 6 
Tube Amplifiers 9 
-600x800.jpg)
